Ebony Studded Brick Semi-Exterior Door – 813mm x 2032mm

Ebony Studded Brick Semi-Exterior Door – 813mm x 2032mm

Make a bold statement with the Ebony Studded Brick Semi-Exterior Door. Featuring a distinctive brick-style panel layout accented with decorative studs and finished in a rich ebony stain, this door is engineered for durability and rustic elegance — perfect for covered entrances and semi-exterior spaces. Door leaf only — no frame or hardware included.

Features

• Engineered pine timber for strength and stability
• Brick-style panel design with fitted decorative studs
• Door is supplied stained in a deep ebony finish
• Single-sided design – flush panel on the inside for a clean interior look
• Exterior D3 glue used throughout for superior bonding
• 1-Year Guarantee
• Made for semi-exterior use – must not be directly exposed to weather

Specifications

• Size: 813 mm (W) x 2032 mm (H)
• Application: Semi-exterior – covered entrances and patios only

Important Installation Notice

This door is designed for semi-exterior use only and must not be directly exposed to rain, wind-driven moisture, or harsh weather. It is suitable for covered entrances, enclosed patios, and internal-to-external transitions with overhead protection.

• Inspect before installation: Check the overall appearance and finish before fitting. Do not install a defective product — no claims will be entertained after installation.
• Sealant (critical): Apply a minimum of 2 coats of quality sealant to all six surfaces — both flat faces and all four edges, including the top and bottom end-grain edges — at installation and at regular intervals thereafter. Failure to seal all six surfaces will void the guarantee.
• Qualified installation: Ensure a qualified carpenter or builder performs the installation. Trimming or cutting voids the warranty. If any cutting is done, re-seal those surfaces immediately.

Treatment & Care for Your New Door

• Seal immediately after purchase with a minimum of 3 coats of quality sealant on all 6 surfaces (4 edges + 2 flat faces) to prevent moisture movement and warping.
• Re-seal every 6 months to ensure maximum longevity.
• Storage: Store flat on a minimum of 3 dunages spaced equally apart, in a cool, dry area.
• Do not install while plaster or screeding is still wet. Install as close to occupation of the property as possible.
• If any planing or cutting is done at installation, re-seal those surfaces immediately.
• Failure to meet any of the above criteria will void the guarantee on the product.

Frequently Asked Questions

Why is sealing all six surfaces so important?
Timber moves as it absorbs or releases moisture. If the top and bottom end-grain edges are left unsealed, the door will absorb moisture unevenly, causing it to warp or bow. All six surfaces — both flat faces and all four edges — must be sealed with a minimum of 3 coats of quality sealant immediately after purchase, and re-sealed every 6 months.

Can I install this door in a fully exposed exterior opening?
No. This is a semi-exterior product and must be protected from direct rain and sunlight by an awning, roof, or similar structure. Direct weather exposure will cause warping and will void the guarantee.

What happens if I trim or cut the door during installation?
Any trimming or cutting voids the warranty. If cutting is unavoidable, all cut surfaces must be re-sealed immediately with a quality sealant.

Can this door warp or bow after installation?
Warping is caused by uneven moisture absorption — most commonly from unsealed end-grain edges or installation in wet conditions (wet plaster, screeding). Sealing all six surfaces immediately after purchase and installing in a dry, completed environment will prevent this.

Okoume and Pine TimberNo glassStained

• Pine

Delivery Information

At Doors Direct, we strive to make the delivery of your quality doors a seamless and convenient experience.

Nationwide Delivery:

Based in Durban, we extend our reach to bring our premium products directly to your doorstep anywhere in South Africa. Our efficient overnight transport ensures that you receive your order promptly.

Cost-Effective Options:

With a diverse range of transport service providers, we have the flexibility to secure competitive quotes, especially for bulk orders. Feel free to contact our office at 031 012 5033 to explore cost-saving options tailored to your needs.

Lead Times and Timely Delivery:

Our commitment to transparency is reflected in the lead times displayed on our website for made-to-order products. Once your order is dispatched, anticipate delivery within 24 – 48 hours, allowing you to enjoy your new doors without unnecessary delays.

Quality Assurance:

Doors Direct takes pride in delivering products that are undamaged and in excellent working order. While we make every effort to maintain the integrity of your purchase, we recognize that, on rare occasions, products may incur damage during shipping.

Damaged Products:

In the unfortunate event that your product arrives damaged, we have a straightforward solution. At our discretion, Doors Direct will either repair or replace damaged items. To facilitate this process, please ensure that the waybill is endorsed with details of the damages. For more details, refer to our comprehensive guarantee policy and terms and conditions at Guarantee Policy and Terms & Conditions.

Contact Us:

Have questions or need assistance? Contact our head office at info@doorsdirect.co.za or 087 012 5286. We are here to ensure your satisfaction at every step of the journey.

Thank you for choosing Doors Direct – Elevating your door-buying experience with quality, efficiency, and reliability.