Gothic Pivot Door – Pre-Hung | 1200mm Wide | Engineered Timber
The Gothic Pivot Door is a pre-hung, factory-assembled entrance door measuring 1200mm wide × 2032mm high, supplied complete in frame and ready to install. It features a distinctive Gothic arch design on the exterior face with a flush panel on the interior, crafted from engineered mixed-species timber using exterior-grade D3 glue throughout.
The unit arrives factory pre-stained and fully fitted with an Elzette lock, pivot hinge, moulded resin handles, and door studs — no additional hardware required. Available in left-hand or right-hand opening.
Specifications
-
Door width: 1200 mm
-
Door height: 2032 mm
-
Overall frame width: 1286 mm
-
Overall frame height: 2120 mm
-
Frame depth: 100 mm
-
Material: Engineered mixed-species timber
-
Glue: Exterior D3 throughout
-
Finish: Pre-stained at factory
-
Application: Semi-exterior (sheltered, not directly weather-exposed)
-
Guarantee: 1 year
What’s Included
- Pre-hung door in frame
- Factory-fitted Elzette lock
- Pivot hinge
- Moulded resin handle set
- Decorative door studs
Configuration Options
- Opens inward only
- Available in left-hand or right-hand opening — select on this product page
- Gothic arch design on exterior face; flush panel on interior face
What Is a Pivot Door?
A pivot door rotates on a top and bottom pivot point rather than side-mounted hinges. This allows for wider, heavier door panels and creates a distinctive architectural swing that is increasingly popular in modern and statement entrances across South Africa.
Semi-Exterior Suitability
This door is rated for semi-exterior use only. It must be installed in a sheltered position — such as a covered entrance, veranda, or enclosed patio — where it will not be directly exposed to rain, wind-driven moisture, or prolonged UV sunlight. For fully exposed exterior applications, a fully weatherproofed exterior door is recommended.
Treatment & Care for Your New Pivot Door
-
Seal immediately after purchase with a minimum of 3 coats of quality sealant on all 6 surfaces (4 edges + 2 flat faces) to prevent moisture movement and warping.
-
Re-seal every 6 months to ensure maximum longevity.
-
Storage: Store upright or flat on a minimum of 3 dunages in a cool, dry area away from direct sunlight.
-
Do not install while plaster or screeding is still wet.
- If any planing or cutting is done at installation, re-seal those surfaces immediately.
- Re-apply a quality wood sealant or stain every 12–24 months depending on exposure conditions.
- Keep the pivot hardware lubricated and check the lock mechanism periodically.
- Failure to meet any of the above criteria will void the guarantee on the product.
Frequently Asked Questions
What is a pivot door and how does it differ from a hinged door?
A pivot door rotates on a top and bottom pivot mechanism rather than side-mounted hinges. This allows for wider, heavier door panels and a distinctive architectural swing. There are no side hinges on a pivot door.
Is this door suitable for full exterior use?
No. This door is rated for semi-exterior use only — it must be installed in a sheltered position such as a covered entrance, internal courtyard, or screened portico. It should not be directly exposed to rain or harsh weather.
What hardware is included?
The door is supplied with a factory-fitted Elzette lock, pivot hinge, moulded resin handle set, and door studs — all included in the price.
How do I choose left-hand or right-hand opening?
Stand outside the building facing the door. If the lock is on your left, select left-hand. If the lock is on your right, select right-hand. Select your preference on this product page before adding to cart.
Is the door pre-finished?
Yes. The door arrives with a factory pre-stain finish applied. You may apply additional coats of stain or varnish on site if desired.
Why is sealing all six surfaces so important?
Timber moves as it absorbs or releases moisture. If the top and bottom end-grain edges are left unsealed, the door will absorb moisture unevenly, causing it to warp or bow. All six surfaces must be sealed with a minimum of 3 coats of quality sealant immediately after purchase, and re-sealed every 6 months.
