Sleeper Pivot Door — Pre-Hung | 1200 x 2032mm | Engineered Timber
Make a bold architectural statement with the Green Door Sleeper Pivot Door. Pre-hung in its frame and factory-fitted with a lock, pivot hinge, and handles, this door arrives ready to install — saving time on site and ensuring a precise, professional finish. The distinctive sleeper-style design features a textured exterior face with a clean flush panel on the inside, striking the perfect balance between character and contemporary minimalism.
Specifications
-
Door width: 1200 mm
-
Door height: 2032 mm
-
Overall frame width: 1286 mm
-
Overall frame height: 2120 mm
-
Frame depth: 100 mm
-
Material: Engineered mixed-species timber
-
Glue: Exterior D3 throughout
-
Finish: Pre-stained at factory
-
Application: Semi-exterior (sheltered, not directly weather-exposed)
-
Guarantee: 1 year
What’s Included
- Pre-hung door in frame
- Factory-fitted Elzette lock
- Pivot hinge
- Moulded resin handle set
Configuration Options
- Opens inward only
- Available in left-hand or right-hand opening — select on this product page
- Sleeper design on exterior face; flush panel on interior face
What Is a Pivot Door?
A pivot door rotates on a top and bottom pivot point rather than side-mounted hinges. This allows for wider, heavier door panels and creates a distinctive architectural swing that is increasingly popular in modern and statement entrances across South Africa.
Semi-Exterior Suitability
This door is rated for semi-exterior use only. It must be installed in a sheltered position — such as a covered entrance, veranda, or enclosed patio — where it will not be directly exposed to rain, wind-driven moisture, or prolonged UV sunlight.
Treatment & Care for Your New Pivot Door
-
Seal immediately after purchase with a minimum of 3 coats of quality sealant on all 6 surfaces (4 edges + 2 flat faces) to prevent moisture movement and warping.
-
Re-seal every 6 months to ensure maximum longevity.
-
Storage: Store upright or flat on a minimum of 3 dunages in a cool, dry area away from direct sunlight.
-
Do not install while plaster or screeding is still wet.
- If any planing or cutting is done at installation, re-seal those surfaces immediately.
- Re-apply a quality wood sealant or stain every 12–24 months depending on exposure conditions.
- Keep the pivot hardware lubricated and check the lock mechanism periodically.
- Failure to meet any of the above criteria will void the guarantee on the product.
Frequently Asked Questions
What is a pivot door and how does it differ from a hinged door?
A pivot door rotates on a top and bottom pivot mechanism rather than side-mounted hinges. This allows for wider, heavier door panels and a distinctive architectural swing. There are no side hinges on a pivot door.
Can I install this door in a fully exposed exterior opening?
No. This is a semi-exterior product and must be protected from direct rain and sunlight by an awning, roof, or similar structure. Direct weather exposure will cause warping and will void the guarantee.
How do I choose left-hand or right-hand opening?
Stand outside the building facing the door. If the lock is on your left, select left-hand. If the lock is on your right, select right-hand. Select your preference on this product page before adding to cart.
Does the door come ready to install?
Yes. The door arrives pre-hung in its frame with the Elzette lock, pivot hinge, and handles factory-fitted. No additional hardware is required.
Why is sealing all six surfaces so important?
Timber moves as it absorbs or releases moisture. If the top and bottom end-grain edges are left unsealed, the door will absorb moisture unevenly, causing it to warp or bow. All six surfaces must be sealed with a minimum of 3 coats of quality sealant immediately after purchase, and re-sealed every 6 months.
