Swartland Sapele Veneer Light-Duty Interior Door — 762 × 2032 × 40mm
A cost-effective hollow core interior door finished in a rich Sapele veneer, sized for standard 762mm wide internal openings. The warm, reddish-brown tones and interlocked grain of Sapele give this door a natural timber character that elevates any interior — at a light-duty price point suited to everyday residential use.
Supplied with exposed edges and ready to seal or varnish, this door is a practical choice for bedrooms, studies, pantries, linen cupboards, and any internal space where a fire rating is not required.
⚠️ Please Note: This door is 762mm wide — narrower than the standard 813mm South African door. It is designed for existing 762mm openings or purpose-built frames. Verify your opening width before ordering.
Key Specifications
-
Door dimensions: 762mm W × 2032mm H × 40mm thick
-
Construction: Hollow core
-
Veneer: Sapele
-
Edging: Exposed edges (no lipping)
-
Finish: Unfinished — seal or varnish required
-
Application: Interior use only
-
Lead time: 12–14 days from order confirmation
About Sapele Veneer
Sapele (Entandrophragma cylindricum) is an African hardwood species prized for its interlocked grain, which produces a distinctive ribbon or stripe figure when quarter-sawn. The veneer surface has a warm reddish-brown tone that deepens beautifully with a clear sealer or varnish. It is a popular choice for interior doors where the appearance of solid timber is desired at a more accessible price.
What Are Exposed Edges?
Exposed edges means the door leaf is supplied without a solid timber lipping applied to the long edges. The core material is visible at the edges. This is standard for light-duty hollow core doors and is perfectly suitable for most interior applications. If you require a lipped edge for trimming or a cleaner finish, consider a lipped variant.
Frequently Asked Questions
What size opening does this door fit?
This door is 762mm wide × 2032mm high. Note that 762mm is narrower than the standard 813mm South African door — it is designed for existing 762mm openings or purpose-built frames. It fits a 813mm wide × 2032mm high door frame (allowing for frame rebates and clearances). Verify your opening width before ordering.
Is this door hollow core?
Yes. This is a hollow core door — the interior consists of a lightweight structural core faced with Sapele veneer on both sides. Hollow core construction keeps the door lightweight and cost-effective for standard interior use.
Does this door need to be finished?
Yes. The Sapele veneer surface is unfinished and must be sealed or varnished before or after installation. Apply a clear interior sealer or varnish to protect the veneer and bring out the natural grain character.
Can I trim this door to fit a smaller opening?
Light-duty hollow core doors have limited trimming allowance due to the hollow core construction. Check the manufacturer’s specification for maximum trim allowance before cutting. If significant trimming is required, a solid core door may be more appropriate.
Is this door fire-rated?
No. This is a standard light-duty interior door and is not fire-rated. It is not suitable for applications requiring a fire door (FD30 or FD60 rating).
What is the lead time for this door?
Lead time is 12–14 days from order confirmation.
Can I hang this door on standard butt hinges?
Yes. This door is designed for standard swing operation and can be hung on conventional butt hinges. Hardware is not included and must be sourced separately.
